Gradall Forklift Parts

Gradall Forklift Parts - Through the period when World War II created a shortage of laborers, the legendary Gradall excavator was born in the 1940s as the brainchild of two brothers Ray and Koop Ferwerda. Partners in a Cleveland, Ohio construction business called Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when so many men left the workforce and joined the military, depleting available workers for the delicate grading and finishing work on highway projects. The Ferwerda brothers decided to make an equipment that would save their business by making the slope grading task more efficient, less manual and easier.

Their very first design prototype was a machine with two beams set on a rotating platform that was attached atop a used truck. A telescopic cylinder moved the beams back and forth that allowed the fixed blade at the end of the beams to push or pull dirt. Before long improving the first design, the brothers built a triangular boom so as to add more strength. Also, they added a tilt cylinder that let the boom turn 45 degrees in both directions. A cylinder was placed at the rear of the boom, powering a long push rod to enable the equipment to be outfitted with either a bucket or a blade attachment.

1992 marked a crucial year for Gradall with their launch of XL Series hydraulics, the most remarkable change in the company's excavators ever since their creation. These top-of-the-line hydraulics systems enabled Gradall excavators to provide comparable power and high productivity on a realistic level to conventional excavators. The XL Series ended the initial Gradall equipment power drawn from gear pumps and low pressure hydraulics. These conventional systems efficiently handled grading and finishing work but had a hard time competing for high productivity tasks.

The new XL Series Gradall excavators proved a significant increase in their digging and lifting ability. These versions were manufactured with a piston pump, high-pressure hydraulics system which showed immense improvements in boom and bucket breakout forces. The XL Series hydraulics system was even developed together with a load-sensing capability. Traditional excavators use an operator to be able to choose a working-mode; where the Gradall system can automatically adjust the hydraulic power intended for the work at hand. This makes the operator's general task easier and also saves fuel simultaneously.

When their XL Series hydraulics came onto the market, Gradall was basically thrust into the highly competitive market of machinery designed to deal with pavement removal, excavation, demolition as well as several industrial jobs. Marketability was further improved with their telescoping boom due to its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Adjustable Jibs

Adjustable Jib - Oftentimes a forklift jib can be amongst the more helpful tools that any construction business can spend money on for carrying and shifting industrial tools on the job site. Jib boom lift truck attachments are actually cheaper as opposed to jib cranes. They are capable of executing basically similar tasks at a fraction of the cost. Making...

More

---

Toyota Forklift Part

Toyota Forklift Part - Since 1992, Toyota Material Handling inc., U.S.A., also referred to as TMHU, continues to be the top selling lift truck provider in the U.S. This business has been situated out of Irvine, California for well over 40 years, offering a comprehensive line of quality lift trucks. With an impressive reputation of durability and reliability, Toyota lift...

More

---

Barrel Clamp

Barrel Clamps - Known as "Barrel Clamp", this hydraulic accessory is utilized on lift trucks in order to clutch objects which you wish to transfer utilizing the lift truck. Typically, they're utilized so as to handle kegs, paper rolls and barrels, together with a few barrel clamp designs having the ability to revolve the load. For example, the revolving function...

More

---

Sideshift Carriage

Sideshift Carriages - These carriage kinds are available on nearly all forklifts and can one of two kinds. The "integral" type means they are part of the original equipment tine carriage while "hang-on", refers to the type that could be added afterward and mounted on the original equipment blade carriage. Sideshift carriages are accessible in different array for side to...

More

---

Clark Forklift Part

Clark Forklift Parts - Performing worldwide, there are now 350,000 Clark forklifts and lift trucks in operation, with in excess of 250,000 of those in service in North America. Clark has five main lines of forklifts across the world, making it one of the most expansive corporations in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel...

More

---

Gas Forklift Parts

Part for Gas Forklift - In the year 1893, inventor Rudolf Diesel developed the diesel engine. The combustion engine works by providing the heat of compression to be able to burn the fuel and initiate ignition. Next the fuel is injected into the combustion chamber. This design is in contrast to spark ignition engines, such as petrol or gasoline engines...

More

---

Spreader Bar for Forklift

Forklift Spreader Bars - ELME has been proudly operating since 1974, becoming the biggest independent spreader manufacturer in the globe. They are a dedicated manufacturer of spreaders meant for numerous different applications like the trailers, handling of containers and swop bodies. Engineering is done in-house by making use of all of the most up-to-date FEM tools and CAD systems. The...

More

---

Attachments for Yale Forklift

Yale Forklift Attachments - Yale Materials Handling Corporation is a Global association who's of NMHG or also known as NACCO Materials Handling Group. NMHG is the largest maker of forklifts and lift trucks in America. Revenues are above 1.5 billion making them the third largest all around globe. NMHG engineers, designs, manufactures, and sells a comprehensive collection of forklifts using...

More

---